Work Support
| Work support item | Function |
|---|---|
| CAUSE OF AUTO-CANCEL | Indicates causes of automatic cancellation of the LDP. |
| AUTO AIM | Outputs camera unit, calculates dislocation of the camera, and displays adjustment direction. Refer to "CAMERA AIMING ADJUSTMENT: DESCRIPTION ". |
Cause of Auto-Cancel Display Item List
When LDP control is canceled under the operating condition, "CAUSE OF AUTO-CANCEL" is memorized.
- Last five cancel (system cancel) causes are displayed.
- "CAUSE OF AUTO-CANCEL" displays the number of times of ignition switch ON/OFF up to a maximum of "39". "39" is kept even when the number exceeds "39". The number returns to 0 when detecting the same cancellation causes are detected.
| Cause of cancellation | Description |
|---|---|
| NO RECORD | - |
| Operating VDC/ABS | VDC or ABS function was operated. |
| Vehicle dynamics | Vehicle behavior exceeds specified value. |
| Steering speed | Steering speed was more than the specified value in evasive direction. |
| End by yaw angle | Yaw angle was the end of LDP control. |
| Departure yaw large | Detected more than the specified value of yaw angle in departure direction. |
| ICC WARNING | Target approach warning of ICC system or IBA system was activated. |
| VDC OFF SW | VDC OFF switch was pressed. |
| CURVATURE | Road curve was more than the specified value. |
| Steering angle large | Steering angle was more than the specified value. |
| ICC main SW hold ON | ICC MAIN switch was held ON for more than a certain period. |
| Brake is operated | Brake pedal was operated. |
| Lateral offset | Distance of vehicle and lane was detached in lateral direction more than the specified value. |
| Lane marker lost | Lane camera unit lost the trace of lane marker. |
| Lane marker unclear | Detected lane marker was unclear. |
| Bank | Road bank angle was more than the specified value. |
| Yaw acceleration | Detected yawing speed was more than the specified value. |
| Deceleration large | Deceleration in a longitudinal direction was more than the specified value. |
| Accel is operated | Accelerator pedal was depressed. |
| Departure steering | Steering wheel was steered more than the specified value in departure direction. |
| Evasive steering | Steering wheel was steered more than the specified value in the evasive direction. |
| R range | Selector lever was operated to R range. |
| Parking brake drift | Rear wheels lock was detected. |
| Not operating condition | Did not meet the operating condition (vehicle speed, turn signal operation, etc.). |