CONFIGURATION (AV CONTROL UNIT): Work Procedure

With Consult-CONSULT Configuration

Write vehicle specification into AV control unit.

To write vehicle specification stored in CONSULT into the AV control unit: GO TO 2.

To write vehicle specification into the AV control unit by hand: GO TO  3.

With Consult-CONSULT Configuration

Select "After Replace ECU" in "Read/Write Configuration." Write data stored in CONSULT with the "Before Replace ECU" function into the AV control unit.

: GO TO  4.

With Consult-CONSULT Configuration

Perform "Manual Configuration." Refer to the Configuration List to write vehicle specification into the AV control unit. Refer to "CONFIGURATION (AV CONTROL UNIT): CONFIGURATION LIST ".

: GO TO 4.

Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.

: WORK END