| Self Diagnosis |
- AV control unit diagnosis.
- Diagnoses the connections across system components, between AV control unit and GPS antenna.
|
| Confirmation/Adjustment |
Display Diagnosis |
The following check functions are available: color tone check by color bar display and white display, light and shade check by gray scale display and touch panel calibration response check. |
| Vehicle Signals |
Diagnosis of signals can be performed for vehicle speed, parking brake, lights, ignition, reverse, side view switch and room lamp. |
| Climate Control |
Start auto air conditioner system self-diagnosis. |
| Navigation |
Steering Angle Adjustment |
When there is a difference between the actual turning angle and the vehicle mark turning angle, it can be adjusted. |
| Speed Calibration |
When there is a difference between the current location mark and the actual location, it can be adjusted. |
| Error History |
The system malfunction and the frequency when occurring in the past are displayed. When the malfunctioning item is selected, the time and place that the selected malfunction last occurred are displayed. |
| Synchronizer FES Clock |
- |
| Speaker Test |
The connection of a speaker can be confirmed by test tone. |
| Vehicle CAN Diagnosis |
The transmitting/receiving of CAN communication can be monitored. |
| AV COMM Diagnosis |
The communication condition of each unit of Multi AV system can be monitored. |
| Hands-free Phone |
The received volume adjustment of hands-free phone, microphone speaker check, and erase memory can be performed. |
| Camera Cont. |
It can perform the confirmation of a signal connection to around view monitor control unit, the calibration of each camera, Correct Draw Line of Camera Image, and Fine Tuning of Birds-Eye View. |
| Delete Unit Connection Log |
Erase the connection history of unit and error history. |
| Initialize Settings |
Initializes the AV control unit memory. |
| Version Information |
Version information of the AV control unit is displayed. |