Component Function Check
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "LIFT RR PULSE" in "Data monitor" mode with CONSULT.
- Check lifting sensor (rear) signal under the following conditions.
Monitor item Condition Value LIFT RR PULSE Seat lifting (rear) Operate (Up) Change (increase)(1) Operate (Down) Change (decrease)(1) Release No change(1) (1) The value at the seat position attained when the battery is connected is considered to be 32768. Is the indication normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".