Active Test
CAUTION:
- Do not perform active test while driving vehicle.
- Make sure to completely bleed air from brake system.
- The active test cannot be started when ABS warning lamp, VDC warning lamp and brake warning lamp are ON.
- ABS warning lamp, VDC warning lamp and brake warning lamp are ON during active test.
- Erase memory of ICC system after implementing active test. Refer to
"CONSULT FUNCTION (ICC/ADAS)
".
- Erase memory of the lane camera unit after implementing active test. Refer to
"CONSULT FUNCTION (LANE CAMERA)
".
NOTE:
- When active test is performed while depressing the pedal, the pedal depression amount will change. This is normal. (Only solenoid valve and ABS motor.)
- "TEST IS STOPPED" in "ABS" with CONSULT is displayed 10 seconds after operation start.
- After "TEST IS STOPPED" in "ABS" with CONSULT is displayed, to perform test again.
Test Item
ABS SOLENOID VALVE
- Select "Up", "Keep" and "Down" of "ACTIVE TEST" in "ABS" with CONSULT. Then use screen monitor to check that solenoid valve operates as shown in the table below.
| Test item |
Display item |
Display () |
| Up |
Keep |
Down |
| FR RH SOL |
FR RH IN SOL |
Off |
On |
On |
| FR RH OUT SOL |
Off |
Off |
On |
| USV[FR-RL] |
Off |
Off |
Off |
| HSV[FR-RL] |
Off |
Off |
Off |
| FR LH SOL |
FR LH IN SOL |
Off |
On |
On |
| FR LH OUT SOL |
Off |
Off |
On |
| USV[FL-RR] |
Off |
Off |
Off |
| HSV[FL-RR] |
Off |
Off |
Off |
| RR RH SOL |
RR RH IN SOL |
Off |
On |
On |
| RR RH OUT SOL |
Off |
Off |
On |
| USV[FL-RR] |
Off |
Off |
Off |
| HSV[FL-RR] |
Off |
Off |
Off |
| RR LH SOL |
RR LH IN SOL |
Off |
On |
On |
| RR LH OUT SOL |
Off |
Off |
On |
| USV[FR-RL] |
Off |
Off |
Off |
| HSV[FR-RL] |
Off |
Off |
Off |
ABS SOLENOID VALVE (ACT)
- Select "Up", "ACT UP" and "ACT KEEP" of "ACTIVE TEST" in "ABS" with CONSULT. Then use screen monitor to check that solenoid valve operates as shown in the table below.
| Test item |
Display item |
Display () |
| Up |
ACT UP |
ACT KEEP |
| FR RH ABS SOLENOID (ACT) |
FR RH IN SOL |
Off |
Off |
Off |
| FR RH OUT SOL |
Off |
Off |
Off |
| USV[FR-RL] |
Off |
On |
On |
| HSV[FR-RL] |
Off |
On |
Off |
| FR LH ABS SOLENOID (ACT) |
FR LH IN SOL |
Off |
Off |
Off |
| FR LH OUT SOL |
Off |
Off |
Off |
| USV[FL-RR] |
Off |
On |
On |
| HSV[FL-RR] |
Off |
On |
Off |
| RR RH ABS SOLENOID (ACT) |
RR RH IN SOL |
Off |
Off |
Off |
| RR RH OUT SOL |
Off |
Off |
Off |
| USV[FL-RR] |
Off |
On |
On |
| HSV[FL-RR] |
Off |
On |
Off |
| RR LH ABS SOLENOID (ACT) |
RR LH IN SOL |
Off |
Off |
Off |
| RR LH OUT SOL |
Off |
Off |
Off |
| USV[FR-RL] |
Off |
On |
On |
| HSV[FR-RL] |
Off |
On |
Off |
ABS MOTOR
- Select "On" and "Off" of "ACTIVE TEST" in "ABS" with CONSULT on screen. Make sure motor relay and actuator relay operates as shown in table below.
| Test item |
Display item |
Display |
| On |
Off |
| ABS MOTOR |
MOTOR RELAY |
On |
Off |
| ACTUATOR RLY () |
On |
On |