LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Body Control System) >> Function Diagnosis >> Diagnosis System (BCM) >> Air Pressure Monitor >> CONSULT-III Function (BCM - AIR PRESSURE MONITOR) >> Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor Mode

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

Screen of data monitor mode is displayed.

NOTE: When malfunction is detected, CONSULT-III perform REAL-TIME DIAGNOSIS. Also, any malfunction detected while in this mode will be displayed at real time.

Display item list

DISPLAY ITEM LIST

Monitor Condition Specification
AIR PRESS FL
AIR PRESS FR
AIR PRESS RR
AIR PRESS RL
  • Drive vehicle for a few minutes.

    or

  • Ignition switch ON and transmitter activation tool is transmitting activation signals.
Tire pressure (kPa, kg/cm2 or Psi)
ID REGST FL1
ID REGST FR1
ID REGST RR1
ID REGST RL1
Ignition switch ON Registration ID: Green
No registration: Red
WARNING LAMP Low tire pressure warning lamp ON: on
Low tire pressure warning lamp OFF: off
BUZZER Buzzer in combination meter ON: on
Buzzer in combination meter OFF: off
NOTE: Before performing the self-diagnosis, be sure to register the ID, or erase the actual malfunction location may be different from that displayed on CONSULT-III.