Component Function Check
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK LDW SWITCH SIGNAL BY CONSULT-III
CONSULT-III DATA MONITOR
- Turn the ignition switch ON.
- Select "LDW SW" of "LANE CAM" data monitor item.
- With operating the LDW switch, check the monitor status.MONITOR STATUS
Monitor item Condition Monitor status LDW SW LDW switch Pressed => Released On => Off
Is the item status normal?
YES: LDW switch circuit is normal.
NO: Refer to DIAGNOSIS PROCEDURE .