Component Function Check

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM COMPONENT FUNCTION CHECK

Turn ignition switch ON.

Check the voltage between ECM harness connector terminals under the following conditions.

VOLTAGE SPECIFICATIONS

ECM			Condition		Voltage (V)
Connector	+	-
Connector	Terminal	Terminal
M107	109	128	Selector lever	P or N	Battery voltage
M107	109	128	Selector lever	Except above	Approx. 0

Is the inspection result normal?

YES: INSPECTION END

NO: Go to "DIAGNOSIS PROCEDURE ".