LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> EX35 Base, AWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Registration >> ID Registration With Transmitter Activation Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ID Registration With Transmitter Activation Tool

  1. With the ignition switch in OFF position, connect CONSULT-III to the Data Link Connector (DLC).
  2. Turn ignition switch to ON position.
  3. Display the "WORK SUPPORT" screen for "AIR PRESSURE MONITOR" and select "ID REGIST".
  4. With the Transmitter Activation Tool (J-45295) pushed against the front left transmitter tire air valve, press the button for 5 seconds. See Fig 1.
  5. Repeat the procedure for the remaining tires in the specified order: Right front, Right rear, Left rear. When ID registration of each wheel has been completed, the turn signal light blinks twice.
  6. After completing all ID registrations, press "END" to complete the procedure, and check that ID registration for all wheels is completed.
    7. Fig 1: Identifying Transmitter Activation Tool (J-45295)
    G00225482Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals