Transmitter Wake-Up Operation
- Turn the ignition switch ON.
- With the Transmitter Activation Tool (J-45295) pushed against the front left transmitter, press the button for 5 seconds. See Figure.
- Check that the low tire pressure warning lamp blinks in the pattern shown as per the following. The pattern indicates that the transmitter wake-up procedure for the wheel is completed. See Fig 1.
- Check that the turn signal lamp blinks twice when the transmitter wake-up procedure for all wheels is completed.
- After completing wake up of all transmitters, make sure low tire pressure warning light goes out.
Courtesy of NISSAN MOTOR CO., U.S.A.