October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Function Check

CHECK FUNCTION

Turn ignition switch ON.
Select "TELESCO SEN" in "Data monitor" mode with CONSULT.

Check the tilt sensor signal under the following conditions.

Monitor item	Condition	Value
TELESCO SEN	Telescopic position	Change between 0.8 [V] (close to top) 3.4 [V] (close to bottom)

Is the indication normal?

YES: INSPECTION END.

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".