LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> EX35 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Power Control System) >> Power Distribution System >> Component Diagnosis >> DTC B2614: Acc Relay >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ACCESSORY RELAY 
    1. Turn ignition switch OFF.
    2. Remove accessory relay.
    3. Check the continuity between accessory relay terminals.
      TERMINALS CONTINUITY REFERENCE

      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace accessory relay.

    Fig 1: Identifying Accessory Relay Terminals
    G04889520Courtesy of NISSAN MOTOR CO., U.S.A.


  1. CHECK ACCESSORY RELAY 
    1. Turn ignition switch OFF.
    2. Remove accessory relay.
    3. Check the continuity between accessory relay terminals.
      TERMINALS CONTINUITY REFERENCE

      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace accessory relay.

    Fig 1: Identifying Accessory Relay Terminals
    G04889520Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals