LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 64 (Power Window Control System) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement >> Initialization Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization Procedure

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery negative terminal or power window control unit connector. Reconnect it after a minute or more.
  2. Turn ignition switch ON.
  3. Operate power window switch to fully open door glass. (This operation is unnecessary if door glass is already fully open.)
  4. Pull and hold power window switch UP (AUTO-UP operation). Even after door glass stops at the fully closed position, pull the switch for 2 seconds or more.
  5. Initialization procedure is complete.
  6. Inspect anti-pinch function.
scientia non olet · About LEMON Manuals