On Board Diagnosis Item

The on board diagnostic system has the following functions:

Diagnostic test mode	Function
Bulb check	MIL can be checked.
SRT status	ECM can read if SRT codes are set.
Malfunction warning	If ECM detects a malfunction, it illuminates or blinks MIL to inform the driver that a malfunction has been detected.
Self-diagnostic results	DTCs or 1st trip DTCs stored in ECM can be read.
Accelerator pedal released position learning	ECM can learn the accelerator pedal released position. Refer to "ACCELERATOR PEDAL RELEASED POSITION LEARNING: DESCRIPTION ".
Throttle valve closed position learning	ECM can learn the throttle valve closed position. Refer to "THROTTLE VALVE CLOSED POSITION LEARNING: DESCRIPTION ".
Idle air volume learning	ECM can learn the idle air volume. Refer to "IDLE AIR VOLUME LEARNING: DESCRIPTION ".
Exhaust valve timing control learning	ECM can learn the exhaust valve timing control. Refer to "EXHAUST VALVE TIMING CONTROL LEARNING: DESCRIPTION ".
Mixture ratio self-learning value clear	Mixture ratio self-learning value can be erased. Refer to "MIXTURE RATIO SELF-LEARNING VALUE CLEAR: DESCRIPTION ".