Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti FX50 and 2011 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK IGNITION RELAY

Turn ignition switch OFF.
Remove ignition relay.
Check the continuity between ignition relay terminals.

TERMINALS CONTINUITY REFERENCE CHART

Terminals	Condition	Continuity
3 and 5	12 V direct current supply between terminals 1 and 2	Existed
3 and 5	No current supply	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace Ignition relay.

Fig 1: Checking Continuity Between Accessory Relay Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.