Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUEL INJECTOR

Turn ignition switch OFF.
Disconnect fuel injector harness connector.
Check resistance between fuel injector terminals as follows.

RESISTANCE SPECIFICATION

Terminals	Resistance
1 and 2	11.1 - 14.3 Ω [at 10 - 60°C (60 - 140°F)]

Fig 1: Checking Resistance Between Injector Connector Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace malfunctioning fuel injector.