DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to , "DTC LOGIC ".
If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to "DTC LOGIC ".

DTC DETECTING CONDITION AND POSSIBLE CAUSES

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B210D	STARTER RELAY ON	IPDM E/R detects that the relay is stuck at ON position even if the followings condition are met for about 1 second. Starter control relay ON/OFF signal from BCM P/N position signal from TCM	Harness or connectors (The CAN communication line is open or shorted.) IPDM E/R