DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If DTC B2560 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to , "DTC LOGIC ".
If DTC B2560 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to , "DTC LOGIC ".

DTC DETECTING CONDITION AND POSSIBLE CAUSES

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible causes
B2560	STARTER CONT RELAY	BCM detects a mismatch between the OFF request of starter control relay to IPDM E/R and the feedback. (The feedback is ON instead of OFF.)	Harness or connectors (The CAN communication line is open or shorted.) IPDM E/R