Component Inspection

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)

Turn ignition switch OFF.
Disconnect CVT shift selector connector.

Measure continuity between CVT shift selector (detention switch) terminals.

CONTINUITY REFERENCE CHART

CVT shift selector (detention switch)		Condition		Continuity
Terminal		Condition		Continuity
8	9	Selector lever	P position	Not existed
8	9	Selector lever	Other than above	Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace CVT shift selector. Refer to , "REMOVAL AND INSTALLATION ".