DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE 1
- Press push-button ignition switch for 1 second under the following condition.
- Selector lever: In the P or N position.
- Brake pedal: Not depressed
- Verify DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE "
NO: GO TO 2.
- Press push-button ignition switch for 1 second under the following condition.
- PERFORM DTC CONFIRMATION PROCEDURE 2
- Insert Intelligent Key into the key slot.
- Press the push-button ignition switch under the following conditions and wait 1 second or more.
- Selector lever is in the P or N position.
- Do not depress brake pedal.
- Verify DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END