Physical Values
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
CONDITION REFERENCE CHART
| Terminal No. (Wire color) | Description | Condition | Value (Approx.) | ||
|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||
| 1 (Y) | Ground | Power steering solenoid valve voltage | Output | Vehicle speed: 0 km/h (0 MPH) (Engine is running) | 4.4 - 6.6 V |
| Vehicle speed: 100 km/h (62 MPH) | 2.4 - 3.6 V | ||||
| 3 (G) | Ground | Ignition switch power supply | Input | Ignition switch: ON | Battery voltage |
| Ignition switch: OFF | 0 V | ||||
| 5 (LG) | Ground | Power steering solenoid valve ground | - | Always | 0 V |
| 6 (B) | Ground | Ground | - | Always | 0 V |
| 8 (P) | Ground | Vehicle speed signal | Input | Vehicle speed: 40 km/h (25 MPH)
CAUTION:
Check air pressure of tire under standard condition.
|
NOTE:
The maximum voltage varies depending on the specification (destination unit).
|
| 10 (V) | Ground | Engine speed signal | Input | Engine is running
|
|
Engine is running
|
|||||
CAUTION:
When using circuit tester or oscilloscope to measure voltage for inspection, be sure not to forcibly extend any connector terminals.