Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK STEERING SWITCH SIGNAL GROUND CIRCUIT
- Disconnect AV control unit connector and spiral cable connector.
- Check continuity between AV control unit harness connector and spiral cable harness connector.CONTINUITY REFERENCE CHART
AV control unit Spiral cable Continuity Connector Terminal Connector Terminal M178 15 M33 33 Existed Is the inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK SPIRAL CABLE
Check spiral cable.
Is the inspection result normal?
YES: GO TO 3.
NO: Replace spiral cable. Refer to , "EXPLODED VIEW ".
- CHECK GROUND CIRCUIT
- Connect AV control unit connector.
- Check continuity between AV control unit harness connector and ground.CONTINUITY REFERENCE CHART
AV control unit Ground Continuity Connector Terminal M178 15 Existed Is the inspection result normal?
YES: GO TO 4.
NO: Replace AV control unit. Refer to "EXPLODED VIEW ".
- CHECK STEERING SWITCH
- Turn ignition switch OFF.
- Check steering switch. Refer to
"COMPONENT INSPECTION ".
Is the inspection result normal?
YES: INSPECTION END
NO: Replace steering wheel. Refer to , "EXPLODED VIEW ".