LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Audio, Visual, Navigation System (CROSSCABRIOLET)) >> BOSE Audio With Navigation >> Symptom Diagnosis >> Normal Operating Condition >> Description >> Related To Voice Recognition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Related To Voice Recognition

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Related to Basic Operation

SYMPTOM CHART - RELATED TO VOICE RECOGNITION

Symptom Possible cause Possible solution
The system does not recognize your command.
or
The system recognizes your command incorrectly
The interior of the vehicle is too noisy. Close the windows or have other occupants quiet.
The volume of your voice is too low. Speak louder.
The volume if your voice is too loud. Speak softer.
Your pronunciation is unclear. Speak clearly.
You are speaking before the voice recognition is ready Press and release "VOICE" switch on the steering switch, and speak a command after the tone sounds.
8 seconds or more have passed after you pressed and released "VOICE" switch on the steering switch. Make sure to speak a command within 8 seconds after you press and release "VOICE" switch on the steering switch.
Only a limited range of voice commands is usable for each screen. Use a correct voice command appropriate for the current screen.
The fan of the air conditioner is too loud. Lower the fan speed as necessary as voice command can be recognized more easily.
The system cannot be operated. The retractable hard top is open.
  • Close the retractable hard top.
  • Open and close the retractable hard top before operating the system.

Related to Item Choice

The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved.

SYMPTOM CHART - RELATED TO ITEM CHOICE

Symptom/error message Solution
Displays "COMMAND NOT RECOGNIZED" or the system fails to interpret the command correctly. 1. Ensure that the command format is valid.
2. Speak clearly without pausing between words and at a level appropriate to the ambient noise level.
3. Ensure that the ambient noise level is not excessive, for example, windows open or defrost on.
NOTE: If it is too noisy to use the phone, it is likely that voice commands will not be recognized.
4. If optional words of the command have been omitted, then command should be tried with these in place.
The system consistently selects the wrong voicetag 1. Ensure that the voicetag requested matches what was originally stored. This can be confirmed by giving the "Addressbook" Directory or Phone Directory command.
2. Replace one of the voicetags being confused with a different voicetag.

Related to Telephone

The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions.

Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.

SYMPTOM CHART - RELATED TO TELEPHONE

Symptom Solution
System fails to interpret the command correctly. 1. Ensure that the command is valid.
2. Ensure that the command is spoken after the tone.
3. Speak clearly without pausing between words and at level appropriate to the ambient noise level in the vehicle.
4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on).
NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized.
5. If more than one command was said at a time, try saying the commands separately.
6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the recognition response for the speaker. Refer to "Speaker adaptation (SA) mode" in owner's manual.
The system consistently selects the wrong voicetag 1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by using the "List Names" command.
2. Replace one of the names being confused with a new name.