Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONTINUITY CONTROL SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect TEL adapter unit connector.
- Check continuity between TEL adapter unit harness connector and ground.CONTINUITY REFERENCE CHART
TEL adapter unit Ground Continuity Connector Terminals B39 20 Existed 27 Is the inspection result normal?
YES: Replace TEL adapter unit. Refer to "REMOVAL AND INSTALLATION ".
NO: Repair harness or connector.