Component Function Check
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "DOOR SW-DR" in "Data monitor" mode with CONSULT-III.
- Check the front door switch (driver side) signal under the following conditions.MONITOR ITEM CONDITION
Monitor item Condition Status DOOR SW-DR Front door switch (driver side) Open ON Close OFF Is the inspection result normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".