PASSENGER SIDE : Component Function Check
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "MIR/SEN RH U-D", "MIR/SEN RH R-L" in "Data monitor" with CONSULT-III.
- Check the mirror sensor (passenger side) signal under the following conditions.MONITOR ITEM CONDITION
Monitor item Condition Value MIR/SEN RH U-D Door mirror (passenger side) Change between
3.4 [V] (close to peak)
0.6 [V] (close to valley)MIR/SEN RH R-L Change between
3.4 [V] (close to left edge)
0.6 [V] (close to right edge)Is the indication normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "PASSENGER SIDE : DIAGNOSIS PROCEDURE ".