LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Automatic Drive Positioner System) >> Ecu Diagnosis Information >> Automatic Drive Positioner Control Unit >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS REFERENCE

Terminal No. Wire color Description Condition Voltage (V) (Approx.)
+ - Signal name Input/Output
1 Ground Y Tilt switch up signal Input Tilt switch Operate (up) 0
Other than above 5
2 Ground LG Changeover switch RH signal Input Changeover switch position RH 0
Neutral or LH 5
3 Ground G Mirror switch up signal Input Mirror switch Operated (up) 0
Other than above 5
4 Ground V Mirror switch left signal Input Mirror switch Operated (left) 0
Other than above 5
5 Ground R Door mirror sensor (RH) up/down signal Input Door mirror RH position Change between 3.4 (close to peak) 0.6 (close to valley)
6 Ground GR Door mirror sensor (LH) up/down signal Input Door mirror LH position Change between 3.4 (close to peak) 0.6 (close to valley)
7 Ground O Tilt sensor signal Input Tilt position Change between 1.2 (close to top) 3.4 (close to bottom)
9 Ground L Memory switch 1 signal Input Memory switch 1 Push 0
Other than above 5
10 Ground V UART communication (TX) Output Ignition switch ON
G05223233
11 Ground GR Telescopic switch forward signal Input Telescopic switch Operate (forward) 0
Other than above 5
12 Ground O Memory indictor 1 signal Output Memory indictor 1 Illuminate 0
Other than above Battery voltage
13 Ground P Memory indictor 2 signal Output Memory indictor 2 Illuminate 0
Other than above Battery voltage
14 Ground W Door mirror motor (RH) up output signal Output Door mirror RH Operate (up) Battery voltage
Other than above 0
15 Ground G Door mirror motor (RH) left output signal Output Door mirror RH Operate (left) Battery voltage
Other than above 0
16 Ground Y Door mirror motor (LH) down output signal Output Door mirror (LH) Operate (down) Battery voltage
Other than above 0
Door mirror motor (LH) right output signal Operate (right) Battery voltage
Other than above 0
17 Ground W Tilt switch down signal Input Tilt switch Operate (down) 0
Other than above 5
18 Ground P Changeover switch LH signal Input Changeover switch position LH 0
Neutral or RH 5
19 Ground SB Mirror switch down signal Input Mirror switch Operate (down) 0
Other than above 5
20 Ground BR Mirror switch right signal Input Mirror switch Operate (right) 0
Other than above 5
21 Ground L Door mirror sensor (RH) left/right signal Input Door mirror RH position Change between 3.4 (close to left edge) 0.6 (close to right edge)
22 Ground G Door mirror sensor (LH) left/right signal Input Door mirror LH position Change between 0.6 (close to left edge) 3.4 (close to right edge)
23 Ground P Telescopic sensor signal Input Telescopic position Change between 0.8 (close to top) 3.4 (close to bottom)
24 Ground R Set switch signal Input Set switch Push 0
Other than above 5
25 Ground SB Memory switch 2 signal Input Memory switch 2 Push 0
Other than above 5
26 Ground Y UART communication (RX) Input Ignition switch ON
G05223236
27 Ground G Telescopic switch backward signal Input Telescopic switch Operate (backward) 0
Other than above 5
30 Ground R Door mirror motor (RH) down output signal Output Door mirror (RH) Operate (down) Battery voltage
Other than above 0
Door mirror motor (RH) right output signal Operate (right) Battery voltage
Other than above 0
31 Ground LG Door mirror motor (LH) up output signal Output Door mirror (LH) Operate (up) Battery voltage
Other than above 0
32 Ground L Door mirror motor (LH) left output signal Output Door mirror (LH) Operate (left) Battery voltage
Other than above 0
33 Ground R Sensor power supply Input - 5
34 Ground R Power source (Fuse) Input - Battery voltage
35 Ground L Tilt motor up output signal Output Steering tilt Operate (up) Battery voltage
Other than above 0
36 Ground GR Telescopic motor forward output signal Output Steering telescopic Operate (forward) Battery voltage
Other than above 0
39 Ground SB Power source (C/B)   - Battery voltage
40 Ground B Ground - - 0
41 Ground Y Sensor ground - - 0
42 Ground O Tilt motor down output signal Output Steering tilt Operate (down) Battery voltage
Other than above 0
44 Ground G Telescopic motor backward output signal Output Steering telescopic Operate (backward) Battery voltage
Other than above 0
48 Ground B Ground - - 0