AUTOMATIC DRIVE POSITIONER SYSTEM : System Description: Outline
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
The system automatically moves the driver seat, steering column and door mirror position by the driver seat control unit and the automatic drive positioner control unit. The driver seat control unit corresponds with the automatic drive positioner control unit by UART communication.
AUTOMATIC DRIVE POSITIONER SYSTEM DESCRIPTION
| Function | Description | |
|---|---|---|
| Manual function | The driving position (seat, steering column and door mirror position) can be adjusted by using the power seat switch, tilt & telescopic switch or door mirror remote control switch. | |
| Seat synchronization function | The positions of the steering column and door mirror are adjusted to the proper position automatically while linking with manual operation [seat sliding, seat lifting (rear) or seat reclining]. | |
| Memory function | The seat, steering column and outside mirror move to the stored driving position by pressing seat memory switch (1 or 2). | |
| Entry/Exit assist function | Exit | On exit, the seat moves backward and the steering column moves upward and forward. |
| Entry | On entry, the seat and steering column returns from exiting position to the previous driving position. | |
| Intelligent Key interlock function | Perform memory operation, exiting operation and entry operation by Intelligent Key unlock operation or driver side door request switch unlock operation. | |
NOTE:
The lumbar support system and the side support system are controlled independently with no link to the automatic drive positioner system.