LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Cruise Control System) >> ICC (Full Speed Range) >> DTC/Circuit Diagnosis >> DTC C1A10: Release Switch >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION LOGIC

DTC (On board display) Trouble diagnosis name DTC detecting condition Possible causes
C1A10 (10) RELEASE SW CIRC If the release switch NO signal and the release switch NC signal, received from the brake booster control unit via ITS communication, are inconsistent
  • Release switch
  • Release switch circuit
  • Brake booster control unit
NOTE: If DTC "C1A10" is detected along with DTC "U1000", first diagnose the DTC "U1000". Refer to "DTC LOGIC ".