Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK IGNITION RELAY

Turn ignition switch OFF.
Remove ignition relay.

Check the continuity between ignition relay terminals.

CONTINUITY SPECIFICATION

Terminals	Condition	Continuity
3 and 5	12 V direct current supply between terminals 1 and 2	Existed
3 and 5	No current supply	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace Ignition relay.

Fig 1: Checking Continuity Between Relay Terminals 3 And 5

Courtesy of NISSAN MOTOR CO., U.S.A.