Physical Values
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS REFERENCE
| Terminal No. (Wire color) | Description | Condition | Value (Approx.) | ||||
|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||||
| 1 (BR) | Ground | AWD solenoid power supply | Output | Engine speed: At idle | 0 V | ||
| Engine speed: 3,000 RPM or more constant | 2.5 V(1) | ||||||
| 2 (Y) | Ground | AWD solenoid ground | Input | Engine speed: At idle | 0 V | ||
| Engine speed: 3,000 RPM or more constant | 0 V | ||||||
| 3 (W) | Ground | Transfer fluid temperature sensor ground | Input | Always | 0 V | ||
| 7 (G) | Ground | Ignition switch | Input | Ignition switch: ON | Battery voltage | ||
| Ignition switch: OFF | 0 V | ||||||
| 8 (L) | - | CAN-H | Input/Output | - | - | ||
| 9 (BG) | Ground | Power supply (AWD solenoid) | Input | Always | Battery voltage | ||
| 10 (B) | Ground | Ground | - | Always | 0 V | ||
| 11 (B) | Ground | Ground | - | Always | 0 V | ||
| 13 (LG) | Ground | Transfer fluid temperature sensor power supply | Output | Transfer temperature: 20°C (68°F) | 1.56 V | ||
| Transfer temperature: 80°C (176°F) | 0.44 V | ||||||
| 15 (Y) | Ground | Power supply (AWD control unit) | Input | Always | Battery voltage | ||
| 16 (P) | - | CAN-L | Input/Output | - | - | ||
|
|||||||
CAUTION:
When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.