Component Function Check
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK WARNING SYSTEMS SWITCH SIGNAL BY CONSULT-III
CONSULT-III DATA MONITOR
- Turn the ignition switch ON.
- Select "LDW SW" of "LANE CAMERA" data monitor item.
- With operating the warning systems switch, check the monitor status.
MONITOR ITEM CONDITIONMonitor item Condition Monitor status LDW SW Warning systems switch Pressed ↔ Released On ↔ Off Is the item status normal?
YES: Warning systems switch circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".