ECM RE-COMMUNICATING FUNCTION : Special Repair Requirement

WARNING: This page is about a different car, the 2011 Infiniti FX50 and 2011 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RE-COMMUNICATING FUNCTION
1. Install ECM.
2. Insert the registered Intelligent Key* in key slot, turn ignition switch to "ON".
  *: To perform this step, use the key that has been used before performing ECM replacement.
3. Maintain ignition switch in the "ON" position for at least 5 seconds.
4. Turn ignition switch to "OFF".
5. Start engine.
Can engine be started?

YES: Procedure is completed.

NO: Initialize control unit. Refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.