Data Monitor
WARNING: This page is about a different car, the 2011 Infiniti FX50 and 2011 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
Monitor item
MONITOR ITEM DESCRIPTION CHART
| Monitor Item [Unit] | MAIN SIGNALS | Description |
|---|---|---|
| RAD FAN REQ [%] | x | Displays the value of the cooling fan speed signal received from ECM via CAN communication. |
| AC COMP REQ [Off/On] | x | Displays the status of the A/C compressor request signal received from ECM via CAN communication. |
| TAIL & CLR REQ [Off/On] | x | Displays the status of the position light request signal received from BCM via CAN communication. |
| HL LO REQ [Off/On] | x | Displays the status of the low beam request signal received from BCM via CAN communication. |
| HL HI REQ [Off/On] | x | Displays the status of the high beam request signal received from BCM via CAN communication. |
| FR FOG REQ [Off/On] | x | Displays the status of the front fog light request signal received from BCM via CAN communication. |
| FR WIP REQ [Stop/1LOW/Low/Hi] | x | Displays the status of the front wiper request signal received from BCM via CAN communication. |
| WIP AUTO STOP [STOP P/ACT P] | x | Displays the status of the front wiper stop position signal judged by IPDM E/R. |
| WIP PROT [Off/BLOCK] | x | Displays the status of the front wiper fail-safe operation judged by IPDM E/R. |
| IGN RLY1 -REQ [Off/On] | Displays the status of the ignition switch ON signal received from BCM via CAN communication. | |
| IGN RLY [Off/On] | x | Displays the status of the ignition relay judged by IPDM E/R. |
| PUSH SW [Off/On] | Displays the status of the push-button ignition switch judged by IPDM E/R. | |
| INTER/NP SW [Off/On] | Displays the status of the shift position judged by IPDM E/R. | |
| ST RLY CONT [Off/On] | Displays the status of the starter relay status signal received from BCM via CAN communication. | |
| IHBT RLY -REQ [Off/On] | Displays the status of the starter control relay signal received from BCM via CAN communication. | |
| ST/INHI RLY [Off/ST/INHI/UNKWN] | Displays the status of the starter relay and starter control relay judged by IPDM E/R. | |
| DETENT SW [Off/On] | Displays the status of the A/T shift selector (detention switch) judged by IPDM E/R. | |
| S/L RLY -REQ [Off/On] | Displays the status of the steering lock relay request received from BCM via CAN communication.
NOTE:
For models without steering lock unit, this item is not monitored.
|
|
| S/L STATE [LOCK/UNLOCK/UNKWN] | Displays the status of the steering lock judged by IPDM E/R.
NOTE:
For models without steering lock unit, this item is not monitored.
|
|
| DTRL REQ [Off] |
NOTE:
The item is indicated, but not monitored.
|
|
| OIL P SW [Open/Close] | Displays the status of the oil pressure switch judged by IPDM E/R. | |
| HOOD SW [Off/On] | Displays the status of the hood switch judged by IPDM E/R. | |
| HL WASHER REQ [Off] |
NOTE:
The item is indicated, but not monitored.
|
|
| THFT HRN REQ [Off/On] | Displays the status of the theft warning horn request signal received from BCM via CAN communication. | |
| HORN CHIRP [Off/On] | Displays the status of the horn reminder signal received from BCM via CAN communication. | |
| CRNRNG LMP REQ [Off] |
NOTE:
The item is indicated, but not monitored.
|