Component Function Check
WARNING: This page is about a different car, the 2011 Infiniti FX50 and 2011 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "PUSH SW" in "Data Monitor" mode with CONSULT-III.
- Check the push-button ignition switch signal under the following condition.
PUSH-BUTTON IGNITION SWITCH CHECK CONDITION CHART
| Test item | Condition | Status |
|---|---|---|
| PUSH SW | Push-button ignition switch is pressed | ON |
| Push-button ignition switch is not pressed | OFF |
Is the indication normal?
YES: INSPECTION END
NO: Go to "DIAGNOSIS PROCEDURE ".