Component Inspection

CHECK MODE SELECT SWITCH (E-SUS MODE SELECT)

Turn the ignition switch OFF.
Disconnect mode select switch (E-SUS mode select) harness connector.
Check the continuity between mode select switch (E-SUS mode select) connector terminals.

CONTINUITY REFERENCE CHART

Mode select switch (E-SUS mode select)	Condition	Continuity
Terminal	Condition	Continuity
1 - 3	When mode select switch (E-SUS mode select): SPORT	Existed
1 - 3	When mode select switch (E-SUS mode select): AUTO	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace mode select switch (E-SUS mode select).