Consult Data Monitor Standard Value
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT DATA MONITOR STANDARD VALUES
| Monitor item | Condition | Value/Status (Approx.) |
|---|---|---|
| SHIFT SENSOR 1 | Selector lever is held in R position | ON |
| Other than the above | OFF | |
| SHIFT SENSOR 2 | Selector lever is held in R and N positions | ON |
| Other than the above | OFF | |
| SHIFT SENSOR 3 | Selector lever is held in H (Home) and N positions | ON |
| Other than the above | OFF | |
| SHIFT SENSOR 4 | Selector lever is held in N and D positions | ON |
| Other than the above | OFF | |
| SHIFT SENSOR 5 | Selector lever is held in D position | ON |
| Other than the above | OFF | |
| SHIFT SENSOR 6 | Selector lever in H (Home) position | ON |
| Other than the above | OFF | |
| P POSITION SWITCH 1 | P position switch is pushed | ON |
| Other than the above | OFF | |
| P POSITION SWITCH 2 | P position switch is pushed | OFF |
| Other than the above | ON | |
| BRAKE SWITCH | Brake pedal is depressed | ON |
| Brake pedal is released | OFF | |
| PARKING ACTUATOR RELAY A | Power switch is ON | ON |
| PARKING ACTUATOR RELAY B | Power switch is ON | ON |
| P/N POSITION CONDITION | Selector lever in P and N positions | ON |
| Other than the above | OFF | |
| NOT P POSITION CONDITION | Selector lever in P position | OFF |
| Other than the above | ON | |
| IGNITION SWITCH | Power switch is ON | ON |
| BRAKE SWITCH (CAN) | Brake pedal is depressed | ON |
| Brake pedal is released | OFF | |
| P POSI LEARNING STATUS | P position learning is completed | COMP |
| P position learning is not completed | INCOMP | |
| BACK UP POWER VOLTAGE | Power switch is ON | 9 - 16 V |
| MAIN POWER VOLTAGE | Power switch is ON | 9 - 16 V |
| MOTOR A U VOLTAGE | No shifting | 9 - 16 V |
| MOTOR A V VOLTAGE | No shifting | 9 - 16 V |
| MOTOR A W VOLTAGE | No shifting | 9 - 16 V |
| MOTOR B U VOLTAGE | No shifting | 9 - 16 V |
| MOTOR B V VOLTAGE | No shifting | 9 - 16 V |
| MOTOR B W VOLTAGE | No shifting | 9 - 16 V |
| ANGLE SENSOR 1 VOLTAGE | Selector lever in P position (Manual plate: P position) | 1.42 - 2.20 V |
| Other than the above (Manual plate: Not P position) | 2.85 - 3.56 V | |
| ANGLE SENSOR 2 VOLTAGE | Selector lever in P position (Manual plate: P position) | 1.42 - 2.20 V |
| Other than the above (Manual plate: Not P position) | 2.85 - 3.56 V | |
| RANGE POSITION | Selector lever in P position | P |
| Selector lever in R position | R | |
| Selector lever in N position | N | |
| Selector lever in D position | D | |
| SHIFT POSITION JUDGMENT | Selector lever in P position | P |
| Selector lever in R position | R | |
| Selector lever in N position | N | |
| Selector lever in D position | D | |
| TARGET SHIFT POSITION | Selector lever in P position | P |
| Selector lever in R position | R | |
| Selector lever in N position | N | |
| Selector lever in D position | D | |
| ECO MODE REQUEST | During ECO mode driving | ECO |
| Other than the above | NORML | |
| ACTUAL P POSITION | Selector lever in P position | P |
| Other than the above | NOT P | |
| VEHICLE SPEED (VDC) | During driving | Almost same as the speedometer display |
| VEHICLE SPEED (VCM) | During driving | Almost same as the speedometer display |
| E-SHIFT WARNING LAMP | Electric shift warning lamp: ON | ON |
| Electric shift warning lamp: OFF | OFF | |
| E-SHIFT WARNING MSG | Warning message is not displayed | - |
| Warning message:"When Parked Apply Parking Brake" | MSG1 | |
| Warning message:"T/M system malfunction visit dealer" | MSG2 | |
| Warning message:"Check position of shift lever" | MSG3 |