Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK VEHICLE READY SET FUNCTION
- Check that DTC except DTC P1610 is not detected.
If detected, erase the DTC after fixing.
- Turn power switch OFF.
- Contact the registered Intelligent Key backside to power switch and wait 5 seconds.
- Turn power switch ON.
- Turn power switch OFF and wait 5 seconds.
- Repeat steps 3 and 5 twice (a total of 3 times).
- Check that vehicle can be set to READY.
INSPECTION END
- Check that DTC except DTC P1610 is not detected.