LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Body Control System) >> System Description >> Diagnosis System (BCM) >> Wiper >> WIPER : CONSULT Function - WIPER >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
DATA MONITOR ITEM DESCRIPTION CHART

Monitor Item [Unit] Description
PUSH SW [Off/On] The switch status input from power switch (push switch)
VEH SPEED 1 [km/h] Displays the value of the vehicle speed signal received from combination meter via CAN communication
FR WIPER HI [Off/On] Status of each switch judged by BCM using the combination switch reading function
FR WIPER LOW [Off/On]
FR WASHER SW [Off/On]
FR WIPER INT [Off/On]
FR WIPER STOP [Off/On] Displays the status of the front wiper stop position signal received from IPDM E/R via CAN communication.
INT VOLUME [1 - 7] Status of each switch judged by BCM using the combination switch reading function
RR WIPER ON [Off/On] Status of each switch judged by BCM using the combination switch reading function
RR WIPER INT [Off/On]
RR WASHER SW [Off/On]
RR WIPER STOP [Off/On] Rear wiper motor (stop position) status input from the rear wiper motor
H/L WASH SW [Off/On]
NOTE: The item is indicated, but not monitored