DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn power switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 2.
CHECK DTC DETECTION
With CONSULT
1. Turn the power switch OFF → ON.
  CAUTION:
  - Be sure to wait of 10 seconds after turning power switch OFF or ON.
  - Set the vehicle to READY.
2. Repeat step 1 two or more times.
3. Perform self-diagnosis for "ABS".
  Is DTC "U1010" detected?
  
  YES: Proceed to "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END