Data Monitor

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

SENSOR DESCRIPTION

x: Applicable

Item (Unit)

Monitor item selection

Note

ECU INPUT SIGNALS

MAIN SIGNALS

FR LH SENSOR [km/h (MPH)]

Wheel speed calculated by front LH wheel sensor is displayed.

RR LH SENSOR [km/h (MPH)]

Wheel speed calculated by rear LH wheel sensor is displayed.

FR RH SENSOR [km/h (MPH)]

Wheel speed calculated by front RH wheel sensor is displayed.

RR RH SENSOR [km/h (MPH)]

Wheel speed calculated by rear RH wheel sensor is displayed.

ACCEL POS SIG (%)

Displays the Accelerator pedal position

SIDE G-SENSOR (m/s2)

Side G detected by side G sensor is displayed.

BATTERY VOLT (V)

Voltage supplied to ABS actuator and electric unit (control unit) is displayed.

DECEL G-SEN (G)

Decel G detected by decel G sensor is displayed.

STR ANGLE SIG (deg)

Steering angle detected by steering angle sensor is displayed.

PRESS SENSOR (bar)

Brake fluid pressure detected by pressure sensor is displayed.

YAW RATE SEN (d/s)

Yaw rate detected by yaw rate sensor is displayed.

FR RH IN SOL (On/Off)

Operation status of front RH wheel ABS IN valve is displayed.

FR RH OUT SOL (On/Off)

Operation status of front RH wheel ABS OUT valve is displayed.

FR LH IN SOL (On/Off)

Operation status of front LH wheel ABS IN valve is displayed.

FR LH OUT SOL (On/Off)

Operation status of front LH wheel ABS OUT valve is displayed.

RR RH IN SOL (On/Off)

Operation status of rear RH wheel ABS IN valve is displayed

RR RH OUT SOL (On/Off)

Operation status of rear RH wheel ABS OUT valve is displayed.

RR LH IN SOL (On/Off)

Operation status of rear LH wheel ABS IN valve is displayed.

RR LH OUT SOL (On/Off)

Operation status of rear LH wheel ABS OUT valve is displayed.

EBD WARN LAMP (On/Off)

Brake warning lamp ON/OFF status is displayed. ⁽¹⁾

STOP LAMP SW (On/Off)

Stop lamp switch signal input status is displayed.

ABS WARN LAMP (On/Off)

ABS warning lamp ON/OFF status is displayed. ⁽¹⁾

MOTOR RELAY (On/Off)

ABS motor and motor relay status is displayed.

ACTUATOR RLY (On/Off)

ABS actuator relay status is displayed.

OFF LAMP (On/Off)

VDC OFF indicator lamp ON/OFF status is displayed. ⁽¹⁾

OFF SW (On/Off)

VDC OFF switch signal input status is displayed.

SLIP/VDC LAMP (On/Off)

warning lamp ON/OFF status is displayed. ⁽¹⁾

EBD SIGNAL (On/Off)

EBD operation status is displayed.

ABS SIGNAL (On/Off)

ABS operation status is displayed.

TCS SIGNAL (On/Off)

TCS operation status is displayed.

VDC SIGNAL (On/Off)

VDC operation status is displayed.

EBD FAIL SIG (On/Off)

EBD fail-safe signal status is displayed.

ABS FAIL SIG (On/Off)

ABS fail-safe signal status is displayed.

TCS FAIL SIG (On/Off)

TCS fail-safe signal status is displayed.

VDC FAIL SIG (On/Off)

VDC fail-safe signal status is displayed.

GEAR

Current gear position judged from current gear position signal is displayed

N POSI SIG (On/Off)

N range signal input status judged from N range signal is displayed.

P POSI SIG (On/Off)

P range signal input status judged from P range signal is displayed.

R POSI SIG (On/Off)

R range signal input status judged from R range signal is displayed.

FLUID LEV SW (On/Off)

Brake fluid level signal input status via CAN communication is displayed.

CV1 (On/Off)

Cut valve 1 operation status is displayed.

CV2 (On/Off)

Cut valve 2 operation status is displayed.

SV1 (On/Off)

Suction valve 1 operation status is displayed.

SV2 (On/Off)

Suction valve 1 operation status is displayed.

STOP LAMP SW2 (On/Off)

ASCD brake switch operation status is displayed.

⁽¹⁾	Refer to "SYSTEM DESCRIPTION " for ON/OFF conditions of each warning lamp.