Power Switch Illumination Control

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

Power Switch Illumination Basic Operation

BCM provides the power supply to turn the power switch illumination ON.

Power Switch Illumination ON Operation

BCM turns the power switch illumination ON in the following conditions.

Power switch ON
Any of the following conditions with power switch OFF/ACC
- Traction motor start permission is entered
- Driver side door is LOCK → UNLOCK
- Driver side door is open

Power Switch Illumination OFF Operation

BCM turns the power switch illumination OFF in any of the following conditions.

The push-button power switch illumination ON conditions are not satisfied.
Any of the following conditions with power switch OFF.
- The power switch illumination ON conditions do not change (15 seconds after the power switch OFF)
- Driver side door is UNLOCK → LOCK