DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE 1
- Turn power switch OFF and wait at least 1 minutes.
- Turn power switch ON and wait at least 35 minutes.
- Check DTC.
Is DTC detected?
YES: "DIAGNOSIS PROCEDURE ".
NO: Go to 2.
- PERFORM DTC CONFIRMATION PROCEDURE 2
- Turn power switch OFF.
- Charge status indicator OFF condition and wait at least 1 minutes.
- Connect EVSE and wait at least 10 seconds.
- Disconnect EVSE and wait at least 35 minutes.
- Check DTC.
Is DTC detected?
YES: "DIAGNOSIS PROCEDURE ".
NO (without quick charge) INSPECTION END
NO (with quick charge) Go to 3.
- PERFORM DTC CONFIRMATION PROCEDURE 3
- Turn power switch OFF.
- Charge status indicator OFF condition and wait at least 1 minutes.
- Connect quick charge connector.
- Start the quick charge and wait at least 1 minutes.
- Stop the quick charge and wait at least 35 minutes.
- Check DTC.
Is DTC detected?
YES: "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END