DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
- DTC REPRODUCTION PROCEDURE
- Turn the ignition switch ON.
- Select "ABS", "WORK SUPPORT" and "ST ANGLE SENSOR ADJUSTMENT" in order with CONSULT-III and perform adjust the neutral position of steering angle sensor.
- Perform self-diagnosis for "ABS" with CONSULT-III.
Is DTC "C1144" detected?
YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END