Component Function Check
WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HAZARD SWITCH SIGNAL BY CONSULT-III
CONSULT-III DATA MONITOR
- Turn the ignition switch ON.
- Select "HAZARD SW" of BCM (FLASHER) data monitor item.
- With operating the hazard switch, check the monitor status.MONITOR ITEM DESCRIPTION
Monitor item Condition Monitor status HAZARD SW Hazard switch ON On OFF Off Is the item status normal?
YES: Hazard switch circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".