Component Function Check

WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.

CHECK OPTICAL SENSOR SIGNAL BY CONSULT-III

CONSULT-III DATA MONITOR

Turn the ignition switch ON.
Select "OPTICAL SENSOR" of BCM (HEADLAMP) data monitor item.
Turn the lighting switch AUTO.

With the optical sensor illuminating, check the monitor status.

MONITOR ITEM DESCRIPTION

Monitor item

Condition

Voltage (Approx.)

OPTICAL SENSOR

Optical sensor

When illuminating

3.1 V or more ⁽¹⁾

When shutting off light

0.6 V or less

⁽¹⁾	Illuminates the optical sensor. The value may be less than the standard value if brightness is weak.

Is the item status normal?

YES: Optical sensor is normal.

NO: Refer to "DIAGNOSIS PROCEDURE ".