DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE-1
- Turn ignition switch ON under the following conditions.
A/T models
- Selector lever is in the P or N position
- Do not depress brake pedal
M/T models
- Do not depress clutch pedal
- Check "Self-diagnostic result" using CONSULT-III.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: Go to 2.
- Turn ignition switch ON under the following conditions.
- PERFORM DTC CONFIRMATION PROCEDURE-2
- Turn ignition switch ON.
- Turn ignition switch OFF.
- Press driver side door switch and wait 1second or more.
- Check "Self-diagnostic result" using CONSULT-III.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END