Component Inspection

WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BLOWER RELAY

Turn ignition switch OFF.
Remove blower relay.

Check the continuity between blower relay terminals.

CONTINUITY SPECIFICATION

Terminals	Condition	Continuity
3 and 5	12 V direct current supply between terminals 1 and 2	Existed
3 and 5	No current supply	Not existed

Fig 1: Blower Relay Connector Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace blower relay