Component Function Check
WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK OPERATION OF METER BUZZER
- Select "BUZZER" of "BCM" on CONSULT-III.
- Perform "LIGHT WARN ALM" of "Active Test".
Does meter buzzer beep?
YES: INSPECTION END
NO: GO TO 2.
- CHECK COMBINATION METER INPUT SIGNAL
Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value.
BUZZER
Under the condition of buzzer input : On
Except above : Off
Is the inspection result normal?
YES: Replace combination meter.
NO: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".