DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always power switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 2.
CHECK DTC DETECTION

With CONSULT

Power switch ON and wait for 10 seconds or more.
Check DTC.

Is "P0A1B" detected?

YES: Go to "DIAGNOSIS PROCEDURE ".

NO: INSPECTION END